Welcome

WELCOME


Welcome to the blog for our campervan build

This project began in May 2020 during the 'lockdown' in the UK due to COVID-19. We were supposed to be touring Europe in our existing camper conversion 'Movano The Van Hoe' but this obviously wasn't going to be possible... So after finishing a pretty ambitious Hot Tub Trailer build (see the blog here) we decided we needed another project to keep us occupied during however many weeks left of lockdown.

We put Movano The Van Hoe up for sale and bought a Renault Master which we will convert over the coming weeks/months.

We are fortunate in that Elliot has a fully equipped workshop with tools and space to work, and we're also fortunate in that this is Elliot's second camper conversion, so we're not totally winging it!

This is a blog of the full build and I make no apologies that it is very photo heavy. The primary purpose of the blog is to document this build both for our own records, and for anyone else who's interested.

We plan on touring around Scotland with our Trailer Hot Tub when travel restrictions are relaxed enough to allow this.

Disclaimer: This is NOT meant as a tutorial. Do not try this at home. Always seek professional expert advice.

Friday, 15 May 2020

Wiring

We've worked today on much of the electrics. The wires need to be fed through the chassis of the van prior to insulating the walls, so we spent some time planning where lights, sockets, fuse board, speakers, battery etc would be and made channels in the chassis to thread all the wires through to where they would be needed.





As you can see we've carefully labelled every wire, as this quickly becomes a nightmare of cables going in all directions and you'd have no idea what's what




We've also made a carpeted board to mount the fuse box onto. To make this, a template is made using cardboard, then this is traced onto plywood and cut out with a jigsaw. We're using Veltrim carpet lining in a light grey colour for the internal walls of the van. This is fixed to the cut out piece of plywood using contact adhesive