Welcome

WELCOME


Welcome to the blog for our campervan build

This project began in May 2020 during the 'lockdown' in the UK due to COVID-19. We were supposed to be touring Europe in our existing camper conversion 'Movano The Van Hoe' but this obviously wasn't going to be possible... So after finishing a pretty ambitious Hot Tub Trailer build (see the blog here) we decided we needed another project to keep us occupied during however many weeks left of lockdown.

We put Movano The Van Hoe up for sale and bought a Renault Master which we will convert over the coming weeks/months.

We are fortunate in that Elliot has a fully equipped workshop with tools and space to work, and we're also fortunate in that this is Elliot's second camper conversion, so we're not totally winging it!

This is a blog of the full build and I make no apologies that it is very photo heavy. The primary purpose of the blog is to document this build both for our own records, and for anyone else who's interested.

We plan on touring around Scotland with our Trailer Hot Tub when travel restrictions are relaxed enough to allow this.

Disclaimer: This is NOT meant as a tutorial. Do not try this at home. Always seek professional expert advice.

Wednesday, 10 June 2020

Kitchen Units

As I said there's a lot of planning involved in any camper conversion.  We've spent A LOT of time planning this kitchen part...




Once we'd decided what sizes of units will suit us best, of course I'm out with my spreadsheets again to compare costs for several kitchen unit companies.

We compared Ikea, B&Q, Howdens and Wren and have decided on B&Q.



So we spent the whole day today building kitchen units...

We've gone with B&Q's 'Caraway' range as it comes in the sizes we want, and is pretty cheap...


Experts in flat pack furniture building...


For the base cabinets, we're having one at 300mm, two at 500mm, and one at 400mm. On top of the 300mm unit closest to the drivers seat, we're having a 150mm unit which will serve as a wine cupboard.

As wall units, we're improvising and using 2x 300mm wall cabinets turned on their side to open upwards.

We had to make another hardboard rear panel for those 300mm wall cabinets that we're turning sideways as the one that comes with the unit obviously has gaps to accommodate the side hinges that we don't need...



Here's all the base cupboards built and assembled!


Kitchen in situ!!


No comments:

Post a Comment